Shop Bikes

Cento10 Hybrid is a racing bicycle with pedal assist that sets a new, very high, standard for the category. There are so many aspects that make it unique on the market: aerodynamics, total integration, lightness, and greater riding safety, just to name a few. With the Cento1 Hybrid, we already reached a high level of quality in pedal-assist racing bikes. Now, with the Cento10 version, we reach heights of construction quality that were unimaginable until a short while ago. You can redefine the limits of your own experience on a racing bike with a design and level of integration that makes it even more similar than ever to a traditional racing bike.

THE FUTURE OF E-ROADS Cento10 Hybrid is the racing bicycle with pedal assist that sets a new, very high, standard for the category. There are so many aspects that make it unique on the market: aerodynamics, total integration, lightness and greater riding safety, just to name a few.With the Cento1 Hybrid, we already reached a high level of quality in pedal assist racing bikes. Now, with the Cento10 version, we reach heights of construction quality that were unimaginable until a short while ago.You can redefine the limits of your own experience on a racing bike with with a design and level of integration that make it even more similar than ever to a traditional racing bike.

Although weight was not an issue in the e-bike world until a short time ago, lightness has become a value determining product quality, performance and usability. With Cento10 Hybrid, we have decreased the frame’s weight by 7 %*.Integration, with the integrated monocoque handlebar Alabarda and a lightweight frame that weigh in at just 10,5 kg in the top configuration. With user, route and use being equal, we can save 4,5 % of the battery charge. This major saving further expands the horizons of Cento10 Hybrid riders. * compared with a Cento1 Hybrid. In common with Wilier's other road-racing bikes, all of the Cento10 Hybrid’s cables are integrated inside the frame. We chose this solution not only for its sleeker looks, but also to improve performance. In addition to hiding the cables inside the Alabarda handlebar and the frame, we also improved aerodynamics thanks to the tubes we used on the Cento10 Hybrid. Smaller volumes, smaller surface area exposed to the air and truncated tail profiles improve aerodynamics by 8 %, with respect to the Cento1 Hybrid. The Cento10 Hybrid’s on-board intelligence allows riders to determine and overcome their limits, as it assists the cyclist at just the right time. There are several options for using and managing the system. The simplest is using only the iWoc controller which turns the system on and off, and allows the rider to select the desired assistance level simply by pressing the backlit button. Riders wanting a higher level of interaction with the system can download the EBIKEMOTION app from AppStore or PlayStore to discover the heart of the control system. Version X35+ of the Ebikemotion system uses the ANT+ communication protocol, so it can communicate with the most popular Garmin and Polar devices.

Cento10 Hybrid is a racing bicycle with pedal assist that sets a new, very high, standard for the category. There are so many aspects that make it unique on the market: aerodynamics, total integration, lightness, and greater riding safety, just to name a few. With the Cento1 Hybrid, we already reached a high level of quality in pedal-assist racing bikes. Now, with the Cento10 version, we reach heights of construction quality that were unimaginable until a short while ago. You can redefine the limits of your own experience on a racing bike with a design and level of integration that makes it even more similar than ever to a traditional racing bike.

Although weight was not an issue in the e-bike world until a short time ago, lightness has become a value determining product quality, performance and usability. With Cento10 Hybrid, we have decreased the frame’s weight by 7 %*.Integration, with the integrated monocoque handlebar Alabarda and a lightweight frame that weigh in at just 10,5 kg in the top configuration. With user, route and use being equal, we can save 4,5 % of the battery charge. This major saving further expands the horizons of Cento10 Hybrid riders. * compared with a Cento1 Hybrid. In common with Wilier's other road-racing bikes, all of the Cento10 Hybrid’s cables are integrated inside the frame. We chose this solution not only for its sleeker looks, but also to improve performance. In addition to hiding the cables inside the Alabarda handlebar and the frame, we also improved aerodynamics thanks to the tubes we used on the Cento10 Hybrid. Smaller volumes, smaller surface area exposed to the air and truncated tail profiles improve aerodynamics by 8 %, with respect to the Cento1 Hybrid.

REDEFINES THE LIMITS The Cento1 Hybrid was designed to re-imagine the traditional limits of usability of a high-level racing bike: a product that combines the special distinctive traits of Wilier Triestina products with the cutting-edge intelligence of the lightest servo-assistance system on the market. The result is a true racing bike with pedal assistance which weighs just 11,9 kilograms - a record in the e-road category. The first intelligent racing bike created with a specific mission: to give as many people as possible the opportunity to enjoy the emotions that only a high-end racing bicycle can offer. Cento1 Hybrid was designed for you, whoever you are: Get yours!

The natural evolution of Cento10PRO, Wilier-Triestina's high-end aerodynamic bike used by professionals. Filante SLR is an extremely lightweight aerodynamic bicycle with a significantly improved stiffness-to-weight ratio. They used the same materials and technology as in the construction of the Wilier 0 SLR. The result is a top-of-the-range, aerodynamic frame that complements their pure ascent bike used by Astana Premier Tech and Total Direct Energy.

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox DHX2 Factory Series coil shock w/2-position compression switch - Fox 38 Factory Series Float 27.5" w/ 3-position adjust compression & lock-out - Stans Flow CB7 Carbon 27.5" tubeless wheels - Shimano XTR, 12-speed - Shimano XTR M9120 4-piston Ice-Tech brakes

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox DHX2 Factory Series coil shock w/2-position compression switch - Fox 36 Factory Series Float 29" w/ 3-position adjust compression & lock-out - Stans Flow CB7 Carbon 29" tubeless wheels - Shimano XTR drivetrain - Shimano XTR 4-piston brakes

Expected to ship late April - beginning of May. Order yours now before they're all spoken for! If the Undertaker rode a mountain bike, he'd undoubtedly ride the Process X CR DL. Aimed at nothing but ripping riders on the most technical of terrain, the Process X DL is a monster on the trails. A full carbon frame features high-end components that leave nothing to be desired. 170mm of plush travel ensures that even the biggest hits are well tamed. Clean lines, fewer cables, and more badass than ever before, the Process X CR DL is as stealthy as it is aggressive. Wheel size: - Size Small: 29-inch (front) / 27.5-inch (rear) - Sizes Medium – X-Large: 29-inch KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.

RAVE SLR EXPECT THE UNEXPECTED Traveling new roads is not just an attitude. It can also become the target for someone who has been making bicycles for over 116 years. With Rave SLR we have set our sights on new horizons, creating a product with two separate souls, perfect for all-road, perfect for gravel, but the same incredible racing inclination. Rave SLR will be a new cycling experience, unexpected for many.

REDEFINES THE LIMITS The Cento1 Hybrid was designed to re-imagine the traditional limits of usability of a high-level racing bike: a product that combines the special distinctive traits of Wilier Triestina products with the cutting-edge intelligence of the lightest servo-assistance system on the market. The result is a true racing bike with pedal assistance which weighs just 11,9 kilograms - a record in the e-road category. The first intelligent racing bike created with a specific mission: to give as many people as possible the opportunity to enjoy the emotions that only a high-end racing bicycle can offer. Cento1 Hybrid was designed for you, whoever you are: Get yours!

WILIER 0 SL, TAKE IT TO THE TOP Can the same performance of the bicycle that won the 2020 Tour of Lombardy be condensed in a competitively priced ride? It is in the Wilier 0 SL, the bike that adopts most of the characteristics of the bicycles used by Astana Premier Tech members Jakob Fuglsang, Alexey Lutsenko and Aleksandr Vlasov. It guarantees the lightest weight, greatest steering precision and cleanest lines with fully frame-integrated cables so that every outing becomes your greatest.

Jena Hybrid has a carbon monocoque frame and fork. The frame’s geometry is similar to the Jena, offering a performance endurance ride combined with a comfortable ride position for long hours spent in the saddle. The Jena Hybrid features traditional components like hydraulic disc brakes, 11-speed transmission and carbon or aluminum rims. The only component added to the traditional configuration is the rear hub containing the 40 Nm Ebikemotion motor to assist pedaling. The motor is powered by a 250 Wh battery perfectly integrated inside the frame’s down tube. System control (on, off and monitoring) is controlled by the iWoc button installed on the handlebar, allowing the rider to choose Jena Hybrid's various assistance modes.

The all new Cento10 SL, much more for the many. The Cento10 SL is the perfect aerodynamic racing bike for athletes like you who are looking for maximum speed in an elegant, sleek bike at a competitive price.

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Factory Series Kashima EVOL shock, 3-position compression - Fox 36 Factory Series Float 27.5", 3-position adjust compression & lock-out - Stans Flow MK3 27.5" tubeless wheels - Shimano XT, 12-speed - Shimano XT M8120 4-piston Ice-Tech brakes

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Factory Series Kashima EVOL shock - Fox 34 Performance Series Float 29", 3-position adjust compression & lock-out - Stans Flow MK3 29" tubeless wheels - Shimano XT, 12-speed - Shimano SLX 4-piston Ice-Tech hydraulic disc brakes

The Hei Hei CR DL is a bike that wins big. It’s bagged three 24-hour solo world championships under Cory Wallace. It’s won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty, high-end components that are light, sturdy, and intended to go the distance. Don’t be fooled by the 120mm of travel. We built this bike so not only does it climb like a bat out of hell, but it is fully capable of taking you down some seriously tricky terrain. Go fast and win big with the Hei Hei CR DL.

The Hei Hei CR DL is a bike that wins big. It's bagged three 24-hour solo world championships under Cory Wallace. It's won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty, high-end components that are light, sturdy, and intended to go the distance. Don't be fooled by the 120mm of travel. We built this bike so not only does it climb like a bat out of hell, but it is fully capable of taking you down some seriously tricky terrain. Go fast and win big with the Hei Hei CR DL. KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. FUSE INDEPENDENT SUSPENSION The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.

LG, and XL expected to ship end of April - beginning of May. The Process 134 CR DL is the Beauty and the Beast of our lineup. Its sleek, cable-free lines and killer, top-of-the-line spec will turn heads all season long. Meanwhile, the 134mm of rear travel descends like nothing you've ever experienced on a mid-travel trail bike. This bike is our secret weapon. It climbs lightning fast and rips downhills like a hungry cougar chasing an ill-fated deer. Sorry, deer. Your time is up.

Custom geometry, 100% Made in Italy with the legendary Columbus Spirit HSS triple thickness steel tubes. Flat mount disc brakes, increased wheel passage for great gravel adventures and high speed downhill. Steel is back. Steel is back to meet the needs of sophisticated riders who demand the most advanced technology with an eye to tradition. Custom built to order, about 6-month delivery time.

Expected to ship April - May '23. Pre-order yours before they’re all spoken for! The Remote 130 has been spotted ripping through the forests from North Vancouver, down to Bellingham, across deserts, and all over the world. A little bit Process 134, a little bit Remote 160, it strikes a perfect harmony between an all-mountain trail bike and fully capable pedal-assist electric mountain bike. A sturdy aluminum frame holds a Shimano motor and battery. Supple suspension keeps the big hits feeling supported and the rough stuff feeling smooth. 29" wheels are wrapped in ultra-sticky rubber, ensuring excellent traction. Whether cramming in an after-work ride, or out for a multi-hour excursion, the Remote 130 is as versatile as the bikes that inspired it. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.

The versatile Hook EXT TI distils the rough-and-ready yet comfortable nature of the Hook collection. Light and responsive, the titanium frame partners alongside a V2 carbon fork with triple cage mounts, as well as a multitude of luggage configurations for added cargo options. Fitted with Shimano’s latest electronic GRX Di2 groupset, a double crankset provides close-ratios but a wide range. Making tubeless set-up easy, its lightweight WTB EZR rims and fast rolling WTB Ranger TCS Light tyres provide excellent speed and traction across mixed conditions.

Expected to ship from Kona May - June '23. Pre-order yours before they’re all spoken for! The Remote 160 brings the joy of a longer travel of an e-MTB to the masses. A 29" wheeled ripper, this bike brings all the fun of a 160mm travel e-MTB in a more affordable package. A Shimano motor and battery provide a customizable amount of pedal-assist ensuring you have the exact amount of power you want when you want it. Ultra-powerful hydraulic disc brakes and 200mm rotors front and rear provide controlled stopping even when you're hauling ass on steeper terrain. No matter what your reasoning, the Remote 160 will have you laughing up and down the trails. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x157mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.

Custom geometry, 100% Made in Italy with the legendary Columbus Spirit HSS triple butted steel tubes. Flat mount disc brakes, increased wheel passage for great gravel adventures and high speed downhill. Nemo Tig Gravel is the sophisticated steel machine. Steel is back to meet the needs of new riders who demand the most advanced technology with an eye to tradition.

Expected to ship late April - beginning of May. Reserve yours before they're all spoken for! For the rider looking to go big on terrain but not break the bank, the Process X CR is a perfect choice. A carbon frame is laced with a durable, but practical build to ensure your money goes where it matters. The 170mm of ultra-squishy travel makes quick work of those features you've been eyeing up. And don't be fooled by the numbers, this bike may go big on the descents, but it is built to ensure you make it to the top with plenty of gas left in the tank. Wheel size: - Size Small: 29-inch (front) / 27.5-inch (rear) - Sizes Medium – X-Large: 29-inch KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.

MOVE FAST A fast ride on a pedal-assist bicycle requires lightweight and efficient components. Triestina Hybrid bicycles guarantee top performance for city and leisure cycling alike. The aluminum frame contains within it the same pedal assist system as the Cento 10 Hybrid, making anything possible. Every detail of the Triestina Hybrid has been designed to keep pace with the latest advances in bicycle design.

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Performance Series EVOL shock, 3-position compression - Fox 36 Performance Series Float 27.5", 3-position adjust compression & lock-out - Stans Flow S1 27.5" tubeless wheels - Shimano SLX, 12-speed - Shimano SLX M7120 4-piston Ice-Tech brakes

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Performance Series EVOL shock, 3-position compression - Fox 34 Performance Series Float 29”, 3-position adjust compression & lock-out - Stans Flow S1 29” tubeless wheels - Shimano SLX, 12-speed - Shimano SLX 4-piston brakes

The Remote 130 has been spotted ripping through the forests from North Vancouver, down to Bellingham, across deserts, and all over the world. A little bit Process 134, a little bit Remote 160, it strikes a perfect harmony between an all-mountain trail bike and fully capable pedal-assist electric mountain bike. A sturdy aluminum frame holds a Shimano motor and battery. Supple suspension keeps the big hits feeling supported and the rough stuff feeling smooth. 29" wheels are wrapped in ultra-sticky rubber, ensuring excellent traction. Whether cramming in an after-work ride, or out for a multi-hour excursion, the Remote 130 is as versatile as the bikes that inspired it. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.