- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
$13.99 - $15.99
• Square taper interface • Only includes left crank
• Square taper interface • Only includes left crank • 175mm length
$9.39 - $14.99
• Forged steel • 24 TPI
$187.00 - $203.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
$300.00 - $330.00
Campagnolo's Record Pista Crankset gives you amazing power transfer for the toughest sprints. If your days are spent dreaming of velodrome glory, then make sure you have the crankset that can get you there.
$12.99 - $17.99
• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless
• Compatible with mini hex chainrings
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Origin-8's Compact Road Crankset is made of light and durable forged aluminum with CNC-machined and black-anodized aluminum chainrings.
Shimano's FC-RS500 Crankset features a casual yet elegant design. It is equally comfortable ripping up a race course or causally cruising cobbled side streets. - BB Included: No - Chainring BCD: 110 - Chainrings Included: Yes - Color: Black - Crank Intended Use: Road - Defined Color: Black - Drivetrain Speeds: 11 - Number of Chainrings: Double - Pedal Spindle: 9/16" - Spindle Diameter: 24 - Spindle Interface Type: Shimano Hollowtech II
- The carbon crank arms are completely hollow with all unnecessary material being removed from the centre core - no internal aluminum spine - Industry standard 30mm spindle with Cinch spline interface. The spindle is CNC machined from a newly commercialized aluminum 'super alloy' that is 20% stronger than 7050 alloy (the alloy commonly used in this application) - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - The interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames
Origin-8's Classic Sport Single Crankset is made of light and durable forged aluminum and it has a stylish machined-aluminum 46-tooth chainring to make your bike the coolest ride on the block.
$120.89 - $150.98
Crank up your off-road rig's efficiency with Shimano's 9-speed Deore Crankset. The right crankarm and oversize bottom-bracket spindle are incorporated into a single unit for substantial weight savings and maximum pedal power. Plus, the hollow cold-forged-aluminum arms are light, extremely durable and beautiful, too.
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
SRAM knows you have a lot of choices when choosing a crankset, and that choice says a lot about your personal style. SRAM designed the X01 Eagle crankset for riders who feel most stylish when they stand on top of the podium. This is a completely reengineered design, employing SRAM's proprietary CARBON TUNED lay-up technology. Built tough, to handle aggressive lines through rock gardens and big hits wherever you find them, the X01 Eagle is the strongest, stiffest, lightest crankset available. Combined with the Eagle direct mount chainrings, and as an integral part of the Eagle drivetrain, this is a crankset that gives your ride a winning style—assuming you’re into that sort of thing. - BB Included: No - Chainring BCD: SRAM GXP Direct Mount - Crank Intended Use: Fat Bike - Drivetrain Speeds: 11, 12 - Rings: 30-tooth - Spindle Diameter: 24-22 Stepped - Spindle Interface Type: Truvativ GXP
$15.00 - $19.99
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
$57.61 - $141.00 $106.00 - $141.00 Up To 46% Savings
With optimized crankarms made from 6061-series aluminum, SRAM's X5 Crankset is stiff, tough and ready to take on the mountain. Its 7075-aluminum X-Glide chainrings have multiple shift points designed for snappy, super-fast shifts up and down.
$415.00 - $445.00
Developed for maximum chain control, SRAM's XX1 X-SYNC Q-Factor Crankset is precisely CNC-machined to support the chain’s inner and outer links perfectly. Plus, the carbon arms and forged aluminum spider make for an incredibly light, stiff crank that delivers every drip of energy to the trail. - BB Included: No - Chainrings Included: Yes - Color: Black - Drivetrain Speeds: 11, 10 - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 32-tooth
Campagnolo's Athena Triple Power-Torque Crankset is the culmination of years of design, engineering, and trickle-down technology. Its lightweight, full carbon crankarms boast the stiffness you need for climbing hills and sprinting out of corners. It also sports Campagnolo's lightweight Power-Torque integrated spindle design for optimum stiffness and efficiency. Plus, the three chainrings deliver a huge a gear range and are specially designed for quiet shifts and long life. - Designed to work with the Athena Triple drivetrain, with a Power-Torque spindle for efficient power transfer - Hollow aluminum crank arm construction - The lowest 'Q' factor available in a triple crankset, and 'U' Factor that is 12mm less than the next closest triple crank on the market for superlative ergonomics - XPSS chainring system for fast & precise shifting - BB included: No - Chainring BCD: 135mm - Drivetrain Speeds: 11 - Number of chainrings: 3
$196.00 - $207.00
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
- Utilizes Race Face CINCH technology for interchangable spiders in 2X, 3X and direct mount chainring configurations, multiple spindle options and compatability across all relevant frame standards - Removable spider offers the ability to convert between existing chainring standards while remaining flexible for future developments - BB Options: BB92, 68/73 BSA, 100mm BSA, PF30 (sold separately) - Includes CINCH spindle - BB not included - Includes 30mm spindle machined from 7050 aluminum alloy; replacement and additional spindle options also available
Shimano's R9100 series crankset achieves the ultimate in optimal power transfer. It does this through its broader Hollowtech II arm and a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. The R9100 cranks set the highest standards for stiffness and lightness. With the first integrated power meter, you can expect extremely accurate data. The FC-R9100-P is Shimano’s first power meter, as well as Shimano’s first crank-integrated power meter on the market. It retains its unique asymmetrical four-arm spider construction, but with a ‘brain’ mounted on the inside. On its crank arm are the strain gauges. Working perfectly in sync with each other, you can use the extremely precise power data to improve your performance. - Accurate real time data - Compatible with 3rd party displays - Bluetooth / ANT technology - Hollowtech II construction - Hollowglide chain - 11-speed compatible - Waterproof in all conditions - ±2% accuracy of strain gage measured power - Integrated rechargeable battery - Simple zero reset with switch on transmitter - Average weight (170mm, w/o BB): 691 grams (53-39T)/679 grams (50-34T)
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
$541.99 - $599.99
Shimano's Dura-Ace 11-Speed Hollowtech II Crankset has set the benchmark in strength-to-weight ratios, which is why it's proven itself at the highest echelon of competition. Made of cold-forged and CNC-machined aluminum, it has hollow crankarms and a hollow large chainring. Both chainrings also feature teeth perfectly designed to assist up- and down-shifts. Perhaps most unique is the 4-arm design that maximizes strength and rigidity where your pedal stroke is strongest. The result is legendary stiffness for awesome power transfer and precision shifting you'll love.
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
- For fitting SRAM/Truvativ BB30 cranks to 68mm shell BB30/PF30 frames if spacer kit is missing - Already supplied with all aftermarket BB30/PF30 bottom bracket bearing sets, but not with OEM applications
$7.30 - $20.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Page 1 of 13 Next page