Wahoo's Bluetooth 4.0 heart rate strap tracks your real-time heart rate training data and calorie burn while you work out. Using your favorite app, watch current heart rate, average heart rate, and time spent in heart rate zones while you workout. • Soft, comfortable strap minimizes chaffing • Bluetooth 4.0 (aka Bluetooth Smart) wireless technology • Long-lasting, replaceable coin cell battery; no need for extra cables or recharging • Adjustable strap fits up to 48” chest • Weight: 45 grams • Does not require the Wahoo Key for use
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration
Topeak's RideCase and mount lets you use your iPhone 6 or 6 Plus as a cycling computer, as a GPS navigating device, to listen to music, and so much more while you're cruising the open road. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. An integrated flipstand allows comfortable viewing in landscape or portrait orientation when you're off the bike. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds.
The Serfas PH-1 Bicycle Phone Holder fits mobile devices with screens 4.7 to 5.5-inches in size. It's made of soft stretchy silicone that won't scratch your device. The injection molded Nylon mount attaches easily to any size bicycle handlebars with a secure strap and single-nut adjustment system. The mount can rotate 360 degrees and locks at every 90-degree rotation for vertical or horizontal screen viewing. - Accommodates Single Mobile Device With 4.7 to 5.5 inch Screen (e.g. iPhone 8, iPhone 8 Plus, and other comparably sized devices) - Easy-To-Use Handlebar Mounting System - Silicone Holder Can Be Removed From Mount With Quick Release Tab - Size: 136mm x 46mm x 19.5mm - Materials: Silicone (Holder) / Nylon (Mount) - Weight: 51.8g
Free yourself from the hassle of wires and see your ride data in any light condition with Serfas' Level 4+ Backlit Wireless Speed Computer. It provides 19 important functions and displays your data big and bold on a backlight LED screen. Other great features include a temperature reading as well as auto start/stop, so your rides never go unrecorded. And, whether you choose handlebar or stem mounting, installation is a breeze. • backlit led • new large screen • handlebar & stem mountable • auto start/stop • km or mi selectable
PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.
- Mount kit for Joule 2.0 - Can be configured for mounting on handlebars or stems
Keep your handlebar organized and your devices secure with the iH-400-STD (22.2/25.4/28.6mm) from Minoura. Fits most smart phones. - Holds a smartphone, cellphone, or GPS. Device is securely supported at 3 points (wings and bottom hook) - Softly padded for protecting phone surface - Just pull a small lever on backside for detaching phone, frame is attached semi permanently by hex bolt for security - New LW-Clamp reduces weight 25 grams than previous model and features a rustproof alloy clamp - 22.2mm-28.6mm diameter
The Minoura iH-500-STD Phone Grip Handlebar Mount for 22.2-28.6mm Bars is a handlebar-mounted smartphone holder with a fixed LW clamp that fits phones with a width of 55-77mm (2.16-2.95 in) and a thickness of 6-18mm (0.24-0.70 in). Lightweight at 141 grams, it will hold your smartphone steady even while going downhill. Its height is user adjustable, and it can be rotated 90 degrees. - Handlebar-mounted smartphone holder with fixed LW clamp fits phones with width of 55-77mm (2.16-2.95 in) and thickness of 6-18mm (0.24-0.70 in) - User-adjustable height; can be rotated 90 degrees without any tools - Holds phone steady even while going downhill - Lightweight at 141 grams - Fits handlebars from 22.2-28.6mm
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
$64.99 - $69.99
The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Monitor your pedaling cadence as you ride with Garmin's easy-to-install wireless sensor. The cadence sensor fastens to any crank arm size and measures pedal strokes per minute so you can get the most out of your training. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain, and move between bikes.
Monitor your pedaling cadence and/or speed as you ride with these easy-to-install wireless sensors. Simply attach the sensors and ride. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The cadence sensor fastens to any crank arm size and measures pedal strokes per minute so you can get the most out of your training. The speed sensor attaches to the hub of either wheel and self-calibrates with your Edge to give you accurate speed and distance at all times, including indoors on the turbo trainer. Combine them both and improve your personal best or see where your stand against the pros.
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Use Garmin's elastic bands with your quarter-turn bike mount to attach your compatible Edge to your bicycle's stem or handlebars.
- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units
Instant bike dashboard Securely hold any phone with any case. Easily mounts on stem (cap or neck) or handlebar to access maps and apps while riding. Features - Secure: Weatherproof bungee and patented cam lock - Compatibility: Works with all phones and cases (including OtterBox and LifeProof cases). Sliding system allows for instant in/out on the go - Construction: Precision molded thermoplastic - Quick Assembly: Handlebar and stem mounts included. Secures to handlebar diameters up to 1 3/8-inch/35 mm - Versatile: Includes additional ElastoMount to connect to any bar and for quick on/off - Weight: 0.24 lbs / 110 grams
The Hefty Holder is designed to securely hold the largest cases for all iPhones, Androids and others. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Otterbox, Lifeproof, and other devices/cases based on the following dimensions: - Maximum: 6.9 x 3.7 x .7 inches (H x W x D) - Minimum: 5.25 x 3.25 x .5 inches (H x W X D) - Handlebars up to 1-3/8-inch diameter
The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter
Cycliq’s 32GB Class 10 microSDHC card with fast read and write speed to record Full HD video. Larger capacity microSD cards mean more footage to capture. Enjoy your journey for longer. Suits all Cycliq bike cameras, as well as most action cameras. Comes with microSD card adaptor that can be used in SD card slots on laptops and computers.
Cadence Magnet for all CatEye computers that record cadence.
Between its large screen and easy wireless setup, CatEye's Padrone is great for those who want a simple, squint-free cycling computer. It's packed with essential features like speed, distance, and time, plus the auto start/stop means you'll always have an accurate ride time and distance for tracking your progress. Analog speed sensor included. Functions: - Current, Max, and Average Speed - Trip Distance - Elapsed Time - Odometer - Clock
CatEye's Strada Slim is packed with essential features like speed, distance, and time, plus it's completely free of wires for a clean look. Both the computer and the speed fork sensor have sliver-thin profiles to increase aerodynamics and stay out of the way. You can customize the large display so you only see the metrics you want.
Keep your bike's front end clean and clutter-free with CatEye's Strada Wireless. Its large screen displays the essentials such as speed, distance, ride time, pace, and more. No wires means a simple, sleek look and easy, hassle-free installation and removal. Plus, this lightweight computer sits with a low-profile on your stem or handlebars and is easy to attach when you want to record your data.
Wheel magnet for all CatEye cycle computers
Page 1 of 12 Next page