Skip to main content

Stem and Handlebar Services

Tape Handlebar $27 SH1
Includes removal of old covering, covers both sides.
Install Foam Grips on Drop Bars

$53

 SH2
Includes removal of old covering, covers both sides.
Install Grips (BMX, MTB, etc.) $10 SH3
Includes removal of old grips, covers both sides.
Install Stem on Road (Drop) Bars      
Non-breakaway Type (excludes recovering bars or resizing cables) $53 SH4.1
Requires disconnecting one brake cable, removing one brake lever; recovering bars is an add-on due to the variety of choices the customer will have; length changes of the stem might require re-sizing all control cables, which could lead to additional brake and derailleur adjustment charges. Applicable if either original or replacement are non-breakaway type.
Breakaway Type (excludes recovering bars or resizing cables) $21 SH4.2
Applicable only if original and replacement are breakaway type. If stem length changes, resizing of brake and derailleur cables requires additional charges for all required brake and derailleur adjustments.
Install Stem on Drop Bars (as part of tune-up or overhaul, excludes any recovering of bars) $13 SH5
All control cable work is covered within the context of the maintenance package; recovering bars is an add-on.
Install Drop Bars (excludes recovering bars) $66 SH6
Same as SH4, except that both sides of bar must be stripped.
Install Drop Bars (as part of tune-up or overhaul, excludes any recovering of bars) $25 SH7
All control cable work is covered within the context of the maintenance package; recovering bars is an add-on.
Install Stem on MTB Bars      
Non-breakaway Type (includes R&R of grip, brake lever, and shift lever, but excludes cable resizing) $21 SH8.1
Add on brake and derailleur adjustment charges when changes of stem length require resizing cables, except as covered by maintenance package being performed at the same time. Applicable if either original or replacement are non-breakaway type.
Breakaway Type (includes R&R of grip, brake lever, and shift lever, but excludes cable resizing) $18 SH8.2
If stem length changes, resizing of brake and derailleur cables requires additional charges for all required brake and derailleur adjustments. Applicable only if original and replacement are breakaway type.
Install MTB Bars (includes R&R of grips and levers excludes cable resizing) $34 SH9
Add-on brake and derailleur adjustment charges when changes of stem length require resizing cables, except as covered by maintenance package being performed at the same time.
Install BMX Stem (two part or hinged) $13 SH10
Stem type requires no grip or lever removal.
Install BMX Stem (hollow bolt with front brake cable routed through stem bolt, includes cable routed through stem bolt, includes front brake adjustment) $57 SH11
Includes charges for front brake adjustment, since cable must be detached (which makes shop liable for brake performance).
Install BMX Handlebars (includes R&R of grips and levers, but excludes cable resizing) $53 SH12
Add-on brake adjustment charges needed if cables must be resized, unless covered by maintenance package being performed at the same time.
Shorten MTB Handlebars (includes R&R of grips and levers, includes resizing of all cables) $57 SH13
Applicable when shortening is done when no other related jobs are done.
Shorten MTB Bars (as part of tune-up overhaul) $28 SH14
Includes grip R&R and relocating levers; cable resizing covered by maintenance package being performed at same time.
Hone Inside Of Fork to Improve Stem Fit $21 SH15
Applied as an add-on anytime the stem is being removed and installed; does not include stem R&R.
Ream Out Inside Of Stem (using expansion reamer to change fit to handlebars) $44 SH16
Add-on to SH4 and SH8 when needed.
Remove Frozen Stem from Fork  Hourly SH17
Unpredictable nature of job makes application of a flat rate impossible; when stem will not remove without being damaged, limit duration of job to be less than the value of replacing the fork.
Install MTB Bar Extensions, External clamp (includes repositioning grips and levers) $28 SH18
Includes trimming ends off of closed end grips, moving in control levers, moving in grips, attaching handlebar extensions, but does not include resizing brake and derailleur control cables, as the amount of extra length created is not great. Additional charges must be added if cables are to be resized.
Install MTB Bar Extensions, Internal clamp (includes trimmings ends off grips) $13 SH19
Includes trimming ends off closed end grips and installing handlebar extensions. No grips or levers need be re-positioned.
Install Aero Clip-On Handlebar Extensions (includes cutting away grip material and refinishing with friction tape) $29 SH20
Includes trimming handlebar cover material to expose handlebar for clip on clamps and using friction tape to refinish the handlebar tape where it has been trimmed. Includes any clip-on assembly, and attachment to the handlebars.
Install Aero Clip-Ons With Shift Levers (includes cutting away grip material, refinishing w/ friction tape, installing shift levers on clip-ons, and adjusting both derailleurs) $94 SH21 Same as SH20, but includes attachment of shift lever mount and shift levers, as well as adjusting both derailleurs.