Derailleur and Shift System Services
| Adjust Front Non-indexing Derailleur | $27 | DS1 | Includes setting proper height and rotation of derailleur; lubrication of derailleur pivots; removing, inspecting, replacing if necessary, and lubing cables; sizing and trimming housings; securing, lubricating, and positioning shift levers; alignment of chainrings not requiring removal of the chainrings or crankarm; adjustment of limit screws. |
| Install Front Non-indexing Derailleur | $32 | DS2 | In addition to DS1, this includes verifying derailleur capacity matches gears and opening the derailleur cage or chain to allow installation of the chain in the cage. |
| Adjust Front Indexing Derailleur | $37 | DS3 | Same as DS1, but includes setting cable tension for proper index function. |
| Install Front Indexing Derailleur | $45 | DS4 | Same as DS2, but includes setting cable tension for proper index function. |
| Adjust Rear Non-indexing Derailleur | $29 | DS5 | Includes aligning derailleur hanger; lubrication of derailleur pivots and pulley wheels; removing, inspecting, replacing if necessary, and lubing cables; sizing and trimming housings; securing, lubricating, and positioning shift levers; checking chain length; adjusting limit screws and derailleur positioning screws. |
| Install Rear Non-indexing Derailleur | $36 | DS6 | In addition to DS5 this includes verifying derailleur capacity matches gears and opening the derailleur cage or chain to allow installation of the chain in the cage. |
| Adjust Rear Indexing Derailleur | $33 | DS7 | Same as DS5, but includes setting cable tension for proper index function. |
| Install Rear Indexing Derailleur | $40 | DS8 | Same as DS6, but includes setting cable tension for proper index function. |
| Overhaul Rear Non-indexing Derailleur (includes derailleur removal & reinstallation) |
$66 | DS9 | Remove derailleur, disassemble and clean, lubricate, install, and adjust; includes same cable and lever work as DS5. |
| Overhaul Indexing Rear Derailleur (includes derailleur removal & reinstallation) |
$70 | DS10 | Same as DS9, but includes setting cable tension for proper index function. |
| Install Down Tube or Thumb Shifters |
$41 | DS11 | Includes installation of shifter set and set-up and attachment of cables only; addition of derailleur adjustment charges will be necessary if original derailleurs are out of adjustment or if a new derailleur is also being installed. |
| Install Bar End Shifter Set | |||
| With handlebar re-taping |
$60 | DS12.1 | Same as DS11, but with charges for wrapping handlebars. |
| With foam grip installation |
$80 | DS12.2 | Same as DS11, but with charges for installing foam grips. |
| Install Drop-Bar Integrated Brake/Shift lever (one side) |
$82 | DS13 | For one side. Includes installing lever, taping bar, installing shift cable, full derailleur adjustment, installing brake cable, and adjusting brake-pad clearance. NOTE: Add full brake-adjustment charge if pads need replacement or any other brake service is needed! |
| Install Flat-Bar Integrated Brake/Shift lever on bike with rim brakes (one side) |
$58.50 | DS14 | For one side. Includes installing lever, grip R&R, installing shift cable, full derailleur adjustment, installing brake cable, and adjusting brake-pad clearance. NOTE: Add full brake-adjustment charge ifpads need replacement or any other brake service is needed. |
| Install Flat-Bar Integrated Brake/Shift lever on bike with mechanical disc brakes (one side) |
$73 | DS15 | For one side. Includes installing lever, grip R&R, installing shift cable, full derailleur adjustment, installing brake cable, and adjusting brake-pad clearance. NOTE: Add full brake-adjustment charge if pads need replacement or any other brake service is needed. |
| Install Flat-Bar Integrated Brake/Shift lever on bike with hydraulic disc brakes (one side) |
$138 | DS16 | For one side. Includes installing lever, grip R&R, installing shift cable, full derailleur adjustment, installing hose, and filling/bleeding system. NOTE: Add full brake-adjustment charge if pads need replacement or any other brake service is needed. |
| Overhaul Campagnolo Ergopower lever (one side) | $138 | DS17 | For one side. Includes removing brake and derailleur cables, removing brake-lever blade, removing assembly from handlebar, disassembly/cleaning/assembly of shift internals, installing shift cable, full derailleur adjustment, installing brake cable, and adjusting brake-pad clearance. NOTE: Add full brake-adjustment charge if pads need replacement or any other brake service is needed. |
| Overhaul SRAM DoubleTap lever (one side) | $130 | DS18 | For one side. Includes removing brake and derailleur cables, removing brake-lever blade, removing assembly from handlebar, disassembly/cleaning/assembly of shift internals, installing shift cable, full derailleur adjustment, installing brake cable, and adjusting brake-pad clearance. NOTE: Add full brake-adjustment charge if pads need replacement or any other brake service is needed! |
| Adjust Internal-Gear Hub Control | $17 | DS19 | Includes setting cable adjuster, and installing new indicator-chain/bell-crank/click-box assembly if necessary. |
| Install and Adjust Internal-Gear Hub Cable |
$32 | DS20 | Includes installing cable, setting cable adjuster, and installing new indicator-chain/bell-crank/click-box assembly if necessary. |
| Install Internal-Gear Hub Lever Only, & Adjust |
$10 | DS21 | Applied when cable does not need to be removed or replaced in order to replace a damaged shift lever. |
| Internal Cable Surcharge (each cable) | $14 | DS22 |